Multisize Coupling M10

Call Us: +353 (0)41 983 2591 | Email: [email protected]

Back to Top

Central body
Carbon steel central body conveniently built in order to allow a perfect insertion of the gasket inside its dedicated conical seat.

Compression ring
Carbon steel compression followers which allow compression of the gasket onto the pipe surface upon tightening the bolts.

Gasket
Truncated-cone sealing gasket which can be perfectly inserted between the central body of the coupling and the circumference of the pipe. It allows a complete hydraulic seal and a 30 mm tolerance range on the pipe OD.

Bolt holes
Round or square holes for the bolt insertion.

Compression bolts
The compression bolts allow the approaching of the compression flanges and the consequent compression of the gasket onto the pipe.

Multisize Coupling M10

DN	Ø d		MOP (PN)	L1	Max. External Dimension Ø C	Compression Bolts	Gap X		Weight
DN	Min.	Max.	MOP (PN)	L1	Max. External Dimension Ø C	Quantity N	Max.	Min.	Weight
350	340	370	6-10-16	170	546	10	60	20	35
350	365	395	6-10-16		571				37
400	390	420	6-10-16		596				40
400	410	440	6-10-16		616				42
450	438	468	6-10-16		644	12			45
450	465	495	6-10-16		671				47
500	490	520	6-10-16		696				49
500	518	548	6-10-16		724				53
600	590	620	6-10-16		796	14			58
	620	650	6-10-16		826				60
	652	676	6-10-16		819				62
700	680	704	6-10-16		847	16			65
	700	724	6-10-16		867				67
	726	750	6-10-16		893				72
	754	778	6-10-16		921				75
800	792	816	6-10-16		959				79
	806	830	6-10-16		973				82
	824	848	6-10-16		991	18			83
	856	880	6-10-16		1023				85
900	882	906	6-10-16		1049				88
	902	926	6-10-16		1069	20			89
	934	958	6-10-16		1101				92
	960	984	6-10-16		1127				95
1000	996	1020	6-10-16		1163				97
	1016	1040	6-10-16		1183	22			100
	1036	1060	6-10-16		1203				102
	1068	1092	6-10-16		1235				104
	1100	1124	6-10-16		1267				108
	1116	1140	6-10-16		1283	24			109
	1140	1164	6-10-16		1307				111
1200	1180	1204	6-10-16		1347				115
	1206	1230	6-10-16		1373	26			117
	1244	1268	6-10-16		1411	26			119

The data concerning the min. and max. gap is calculated on the minimum outside diameter of the product's range

Multisize series and wide range steel fittings provide the maximum hydraulic seal, however they do not restrain axial pipes movement (for this type of products please refer to the MULTIGRIP section)

Related Products

call back