Back to Top

Battery Powered Flow & Pressure Products

Battery Powered SITRANS Mag 8000

MAG 8000 is a comprehensive meter which intelligent information and high performance measurement as well as the easy to install concept take cost of ownership and customer service to a new level for water meter.

Benefits
  • Easy to install
  • Long lasting performance
  • Low cost of Ownership
  • Intelligent information, easy to access
  • Compact or remote solution with factory mounted cable and customer setting from factory
  • IP68/NEMA 6P enclosure. Sensor can be buried
  • Flexible power supply - internal or external battery pack or mains power supply with battery back-up possibilities
  • Superior measurement
  • Down to 0.2 % maximum uncertainty
  • OIML R 49 type approval
  • PTB K7.2
  • FM Fire Service Approval
  • Bi-directional measurement
  • Mains Powered Flow & Pressure Products

    Mains Powered SITRANS F M MAG 1100

    The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications.

    In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
  • SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
  • SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
  • SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate


  • Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.

    Benefits
  • Short lead time
  • Rugged NBR hard rubber liner for all water and wastewater applications
  • EPDM liner specifically for drinking water applications requiring special approvals
  • Ebonite liner for drinking water, water and wastewater applications
  • Increased low flow accuracy for water leakage detection (NBR or EPDM liner))
  • Suitable for direct burial and constant flooding (IP68)
  • Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint

  • Mains Powered SITRANS F M MAG 1100

    The SITRANS F M MAG 1100 is an electromagnetic flow sensor in a compact wafer design designed for flow applications in the process industry.

    Benefits
  • Sensor sizes: DN 2 to 100 (1/12” to 4”)
  • Compact wafer design meets EN 1092, DIN and ANSI flange standards
  • Corrosion resistant AISI 316 stainless steel sensor housing
  • Highly resistant liner and electrodes fitting most extreme process media
  • Temperature rating up to 200 °C (392 °F)
  • Hose proof IP67/NEMA 4X enclosure rating
  • Designed that patented in-situ verification can be conducted
  • Using SENSORPROM fingerprints

  • Mains Powered SITRANS F M MAG 1100 F

    The electromagnetic sensor SITRANS F M MAG 1100 F is designed to meet applications in the food and beverage industry.

    Benefits
  • Sensor sizes: DN 10 to DN 100 (3/8” to 4”)
  • AISI 316 stainless steel enclosure
  • Sensor: Hygienic connection, 3A approval and EHEDG certified
  • Sanitary design for CIP / SIP cleaning
  • Conforms to FDA
  • Easy commissioning, the SENSORPROM unit automatically updates settings
  • Hose proof IP67/NEMA 4X enclosure rating
  • Designed that patented in-situ verification can be conducted.
  • Using SENSORPROM fingerprints

  • Mains Powered SITRANS F M MAG 3100

    The SITRANS F M MAG 3100 is an electromagnetic flow sensor in a large variety that meets the demands of almost every flow application.

    Benefits
  • Wide range of sizes: DN 15 to DN 2000 (½” to 78”)
  • The flexible design is for all applications not covered by the standard industry-specific sensors: MAG 1100, MAG 1100 F, MAG 3100 P and MAG 5100 W
  • Wide pressure range: PN 6 to PN 100
    ANSI Class 150/300, AS 2129, AS 4087, JIS K10 and K20
  • On request up to 690 bar (10 000 psi)
  • Wide range of electrode and liner material to fit even the most extreme process media
  • Fully welded construction provides a ruggedness that suits the toughest applications and environments
  • Easy commissioning, the SENSORPROM unit automatically updates settings
  • Designed to allow patented SITRANS F M in-situ verification using the SENSORPROM fingerprints

  • Mains Powered SITRANS F M MAG 3100 P

    The SITRANS F M MAG 3100 P is designed to meet the most common specifications within chemical and process industries.

    Benefits
  • DN 15 to DN 300 (½” to 12”)
  • Included in Quick Ship Program (delivery time see PIA LCP)
  • Most used flowmeter in the chemical and process industries with PTFE/PFA liner and Hastelloy electrodes
  • Excellent chemical resistance
  • Full scope of global approvals for hazardous areas:
    - ATEX, FM, CSA, IEcEx
    - 24 V and 115/230 V Ex compact and remote
    - intrinsically safe ia analog output
  • Comprehensive self-diagnostic for error indication and error logging
  • Fully welded construction provides a ruggedness that suits the toughest applications and environments
  • Easy commissioning, the SENSORPROM unit automatically updates settings.
  • MAG 6000 I full NAMUR compliance
    - compliant with NE 21, NE 32, NE 43, NE 53 and NE 70

  • Mains Powered SITRANS F M MAG 5000 / 6000 F

    The MAG 5000 and 6000 are transmitters engineered for high performance, easy installation, commissioning and maintenance. The transmitters evaluate the signals from the SITRANS F M sensors type MAG 1100, MAG 1100 F, MAG 3100, MAG 3100 P and MAG 5100 W.

    Transmitter types:
  • MAG 5000: Max. measuring error ± 0.4 % ± 1 mm/s (incl. sensor)
  • MAG 6000: Max. measuring error ± 0.2 % ± 1 mm/s (incl. sensor, see also sensor specifications) and with additional features such as: "plug & play" add-on bus modules; integrated batch functions.
  • Benefits
  • Superior signal resolution for optimum turn down ratio
  • Digital signal processing with many possibilities
  • Automatic reading of SENSORPROM data for easy commissioning
  • User configurable operation menu with password protection.
  • 3 lines, 20 characters display in 11 languages.
  • Flow rate in various units
  • Totalizer for forward, reverse and net flow as well as additional information available
  • Multiple functional outputs for process control, minimum configuration with analogue, pulse/frequency and relay output (status, flow direction, limits)
  • Comprehensive self-diagnostic for error indication and error logging (see under SITRANS F M diagnostics)
  • Batch control (MAG 6000 only)
  • Custody transfer approval: PTB, OIML R 117, OIML R 49, MI- 001, PTB K 7.2 and OE12/C 040 for chilled water
  • MAG 6000 with add-on bus modules for HART, FOUNDATION Fieldbus H1, DeviceNet, Modbus RTU/RS 485, PROFIBUS PA and DP
  • 
    call back